Barden Commercial Standard Specs
FLOOR DECK FRAMING
- 5 1/2" x 1/4" Styrofoam sill seal
- 2x 6 pressure treated wall plate
- Girders per plan
- Wood floor joists per plan
- 3/4" pine T&G plywood sub-floor with adhesive
- One-piece steel basement posts
- Wood bridging / blocking
EXTERIOR WALLS AND INTERIOR PARTITIONS
- 2 x 6 SPF exterior wall studding, 16" o.c., 9' 1-1/8" per plan
- 2 x 4 SPF interior wall studding and 2 x 6 plumbing walls, 16" o.c
- 7/16" Oriented Strand Board (OSB) sheathing on all exterior walls & gables
- Horizontal vinyl siding with building wrap
- Single bottom plate and double bottom plates (triple top plates for spans greater than 30ft)
- Full gable end walls for all scissor truss applications
- Pressure treated bottom plates for all walls on concrete
ROOF AND CEILING FRAMING MATERIALS
- Main chord trusses – sized as required (SPF or SYP per design requirements), 24" o.c. 5/12 pitch with 12" rake and 24" eave overhangs, non-treated sub fascia
- Lateral and diagonal truss bracing
- Certainteed 30-year warranty self-sealing fiberglass roof shingles with ice shield, 15 lb. felt, aluminum drip edge and flashing
- 5/8" pine roof plywood with H clips
- Truss anchors and ceiling drywall brackets
- Nail-over ridge vent
EXTERIOR TRIM
- Aluminum fascia and vinyl soffit system
- Aluminum columns at porches and carports
EXTERIOR DOORS AND WINDOWS
- Bronze aluminum insulated glass front entry door system
- Insulated metal service doors per plan
- Windows to be Integrity Series by Marvin with wood interior per Plan with High Performance glass and screens. Grills are extra
- Any Aluminum Units assumed to have drywall returns only
INTERIOR TRIM
- 1-3/4" solid core flush unfinished birch veneer interior doors with metal frames excluding multi-family buildings with 1-3/8" hollow core doors with wood jambs (except fire doors)
- 2-1/4" pine casing and 3" pine base trim; colonial style
- Prefinished white metal closet shelving
- Preassembled yellow pine closed stair units with poplar handrail system
- Bifold and bypass closet doors are hollow core
HARDWARE
- Commercial grade door hardware, satin chromium plated finish, lever handles
- Panic and closer hardware per code and per plan
- Kick plates on interior doors per plan
KITCHEN CABINETS, VANITIES AND COUNTERTOP
- Manufactured wood cabinets and vanities with countertops (non commercial grade)
- Commercial lavatories have vanity tops & brackets only, no cabinets
PANEL AND COMPONENT MATERIAL ASSEMBLY
- All exterior wall panels assembled with sheathing applied
- Interior partitions assembled
- Pre-cut floor framing
- Designed wood roof trusses and precut miscellaneous roof framing (Larger trusses will require some jobsite assembly)
- 1. Material delivered to jobsite on a pre-arranged schedule
- 2. Tractor crane with operator available, subject to size and/or weight limitations and availability.